Fujitsu ScanSnap iX1500 Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu ScanSnap iX1500. Fujitsu ScanSnap iX1500 14 halaman.

Halaman Cetak
Fujitsu ScanSnap iX1500 Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai
Notice
Make sure that both ends of the Guide-P-ASSY (sheet guide) are locked firmly.
(4) Close the ADF top section.
Be careful not to get your fingers caught when closing the ADF.
Resetting the Number of Consumable Usage
After replacing the consumables, reset the number of consumable usage in the following procedure.
(1) Tap
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
(2) Tap
to display the [Maintenance] screen.
(3) Tap [Check consumable status] to display the [Check consumable status] window.
(4) Tap [Reset].
(5) When the message appears, tap [OK].
The value for [Current Count / Replacement Cycle] becomes [0].