Brother HL-2270DW Panduan Pengaturan Cepat - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Server Cetak Brother HL-2270DW. Brother HL-2270DW 36 halaman. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Juga untuk Brother HL-2270DW: Panduan Pengaturan Cepat (36 halaman), Panduan Pengguna Jaringan (47 halaman), Panduan Instalasi (5 halaman), Panduan Pengaturan Cepat (35 halaman), Pertanyaan Umum & Pemecahan Masalah (6 halaman)

Wireless Network

If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to p.

Enter the Network Key and then enter the key

again in Confirm Network Key, then click

Next.

Click Next. The settings will be sent to your

machine.

Note

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• (For USB cable users) If the wireless setup

failure screen appears, click Retry and try

starting from step m again.

For USB cable users, go to u.

For Ethernet cable users, go to r.

A wireless LAN report will automatically be

printed.

<< WLAN report >>

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

C o n n e c t i o n : O K

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Choose the status as it is shown for the

Connection on the wireless LAN report. Click

Next. If your status is "Connection:OK", go to

step u. If your status is "Connection:Failed",

go to step t.

Click Finish. Wireless setup failed as it was

unable to associate with a wireless network.

Check the error code on the printed wireless

LAN report and refer to

Troubleshooting on page 28. Then try starting

from step b again.

Macintosh