Fujitsu ScanZen EK6 Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu ScanZen EK6. Fujitsu ScanZen EK6 18 halaman.
Halaman Cetak
The roller set consists of a brake roller and a pick roller. Here's how to replace the rollers:
1. Remove all documents from the ADF paper chute (feeder).
2. Open the ADF.
3. Remove the brake roller.
a. Press the cover bushing of the brake roller to open the cover in the direction of the
arrow.
b. Pull out the left side of the brake roller shaft, and then pull out the right side of the shaft
from the hole.
4. Remove the brake roller from its shaft.
CG00002-297901
©ScanZen
Replacing the Roller Set
Brake roller shaft
CAUTION:
Be careful not to have your fingers
caught when the ADF closes.
Brake roller
Brake roller shaft
3