Fujitsu SP-1125 Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu SP-1125. Fujitsu SP-1125 18 halaman.
Halaman Cetak
SP1120\1125\1130 Consumable Replacement and Cleaning
8.
Attach a new pick roller from the bottom.
a. Check the direction of the notch on the pick roller and of the small roller, and insert it in the hole.
b. Close the sheet guide.
ATTENTION
Check that the pick roller is installed properly. Otherwise, it may cause feeding errors such as paper jams.
.
9
Close the ADF.
CAUTION
Be careful not to have your fingers caught when the ADF closes.
10.
Reset the roller set counter.
Start the Software Operation Panel and reset the counter.
CG00002-291501
Instructions
Notch
Small Roller
6