Fujitsu 200 Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Fujitsu 200. Fujitsu 200 2 halaman. Harsh environment case for pencentra 130
Juga untuk Fujitsu 200: Panduan Pengguna (2 halaman), Lembar Spesifikasi (2 halaman), Panduan Pengguna (8 halaman), Petunjuk Pengguna (1 halaman), Petunjuk Pengguna (1 halaman), Petunjuk Pengguna (2 halaman)

Halaman Cetak

FMW51DS1

Docking Station

User's Guide

PenCentra 130

These instructions provide details on using the

PenCentra 130 Docking Station with your pen tablet.

The PenCentra 130 Docking Station is best suited for

desktop computing tasks when a quick and temporary

connection to peripheral computer equipment is needed

and the pen tablet alone does not provide the necessary

connectivity. The docking station provides the following

interfaces for connection to peripheral computer

equipment (see Figure 1 for locations):

• Serial port

This port allows you to connect an external device with a

serial interface.

Note:

•

The docking station serial port does not

support the ring indicate feature

•

Pin 9 on the docking station serial port does

not supply 5 volts (as the pen tablet does).

• PS/2-style port

This port allows you to attach a PS/2-style mouse or

keyboard.

• USB port

This port allows you to attach a Universal Serial Bus

(USB) connector.

•

DC input

This port allows you to connect an AC Adapter to

provide input power. This input can be used for

powering the system while it is running, or for charging

the system battery.

The following illustration shows the location of

peripheral interfaces on the docking station.

Serial Port

DC Input

Figure 1. Docking Station - Rear

7/99

PS/2-style Port

USB Port

Circuitry in the PenCentra 130 and the docking

station is designed to be robust, however, the pen

tablet and connected devices can be damaged if

procedures given in these instructions are not

followed when connecting devices.

To avoid damage to your hardware, observe the

following guidelines when using your docking

station:

• Do not touch connector pins or connector

sockets on your equipment. Electrostatic

discharge can damage interface circuitry in your

equipment.

• Do not connect or disconnect any device when

the system is running. Always turn off devices

and suspend system operation before

connecting to or disconnecting peripheral

devices.

• Do not use corresponding connectors on the pen

tablet and the docking station simultaneously.

Interfaces on the pen tablet are duplicated by the

docking station. Connecting devices to

equivalent connectors on the pen tablet and

docking station at the same time could damage

equipment.

• Do not jam or force component connections.

Installing the PenCentra in the Docking Station

To install your PenCentra 130 into the docking station,

1. Suspend the pen tablet operation by either

pressing the suspend/resume button or by

shutting down from the Start menu.

2. Turn off any peripheral devices you intend to

connect to the docking station.

3. Turn off any peripheral devices that are already

connected to the docking station.

4. If you are connecting or disconnecting

peripheral devices to the docking station, do so

now.

When connecting peripherals, tighten the

connector screws, if used, to maintain consistent

and reliable connections between the devices

and the docking station.

Caution

58-0677-00A