Brother HL-4040CN Petunjuk Teknis - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Teknis untuk Server Cetak Brother HL-4040CN. Brother HL-4040CN 6 halaman. Brother printer - laser printer user manual
Juga untuk Brother HL-4040CN: Brosur (4 halaman), Panduan Pengaturan Cepat (35 halaman), Brosur & Spesifikasi (2 halaman), Daftar Referensi Bagian (40 halaman), Panduan Pembaruan Layanan (11 halaman), Pembersihan dan Perawatan (7 halaman), Panduan Servis (13 halaman), Panduan Pengguna (Denmark) (35 halaman)

Step 15

Set the doctor blade onto the toner

hopper and install the two screws

that hold the doctor blade in place

(See photo 18).

Note: To prevent toner leaks from

the sides of developer roller, the

felts must be fluffy.

PHOTO 18

rights

reserved.

Future

Graphics

Corporation (FGIC) is a distributor of compatible

replacement parts and products for imaging equip-

ment. None of FGIC's products are genuine OEM

replacement parts and no affiliation or sponsorship

is to be implied between FGIC and any OEM.

PHOTO 19

PHOTO 20

PHOTO 21

PHOTO 22

PHOTO 23

Imaging

Brother HL-4040CN Technical Instructions

Step 16

Slide in the white bearing tab to the devel-

oper roller drive shaft (See photo 19). Place

the developer onto the toner hopper and

rotate the white bearing tab until it locks into

its position (See photo 20).

Step 17

Install the developer roller bearing end cap

onto the side of the toner hopper and install

the Phillips screw that holds it in place (See

photo 21).

Step 18

Install the tension spring and the white plas-

tic alignment hub to the developer roller

shaft (See photo 22).

Step 19

Install the developer roller drive gear to the

driver shaft of the developer roller, Place the

"E" clip onto the drive shaft of the develop-

er roller. Use a needle-nose pliers to snap

the "E" clip back into place (See photo 23).