Fujitsu Citrix XenServer Panduan Konfigurasi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu Citrix XenServer. Fujitsu Citrix XenServer 23 halaman. Storage eternus dx server connection

Halaman Cetak
Chapter 7
Setting Up XenServer
7.3

Checking LUN Status

7.3
Checking LUN Status
This section describes how to check LUNs.
1
Log into XenServer with the administrator account (root user).
Log into XenServer remotely using a terminal emulator or log into XenServer using XenCenter.
2
Execute the following command in the console screen and check the recognition status of the LUNs.
cat /proc/scsi/scsi
Output example:
When connecting the ETERNUS DX100 S3 in a two-path configuration by creating two LUNs
Check that the number of recognized LUNs is correct.
The SCSI disks for the number of connected LUNs
for each path are recognized. (In this example,
four SCSI disks are recognized since there are
two LUNs in the two-path configuration.)
$ cat /proc/scsi/scsi
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: FUJITSU
Type:
Host: scsi5 Channel: 00 Id: 00 Lun: 01
Vendor: FUJITSU
Type:
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: FUJITSU
Type:
Host: scsi6 Channel: 00 Id: 00 Lun: 01
Vendor: FUJITSU
Type:
7.4

Creating a Storage Repository

To create a Storage Repository, refer to the relevant Citrix documents.
Model: ETERNUS_DXL
Direct-Access
Model: ETERNUS_DXL
Direct-Access
Model: ETERNUS_DXL
Direct-Access
Model: ETERNUS_DXL
Direct-Access
For a multipath configuration,
check that the same number of LUNs is
recognized for each path.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Citrix
Copyright 2017 FUJITSU LIMITED
Check that the connected
ETERNUS DX model is
correct.
Rev: 0000
ANSI SCSI revision: 05
Rev: 0000
ANSI SCSI revision: 05
Rev: 0000
ANSI SCSI revision: 05
Rev: 0000
ANSI SCSI revision: 05
17
®
®
XenServer
P3AM-8552-06ENZ0