Fujitsu eternus af Panduan Konfigurasi - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu eternus af. Fujitsu eternus af 32 halaman. Fibre channel for citrix xenserver
Juga untuk Fujitsu eternus af: Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (43 halaman)
![Fujitsu eternus af Panduan Konfigurasi](/uploads/products/server2/2442740/2442740.jpg)
Chapter 4
Checking Fibre Channel Card Information
The WWNs of Fibre Channel cards are necessary when a system error occurs, when server access to the ETER-
NUS DX/AF is limited (such as when using the Host Affinity function), or when the ETERNUS DX/AF is connec-
ted to the server via Fibre Channel switches.
Use the methods described in the following examples to obtain the WWN information of the Fibre Channel
card to be used.
Example 1:
Check the WWN using the utilities that are provided by the Fibre Channel card vendors.
Emulex: LightPulse BIOS Utility
QLogic: Fast!UTIL
Example 2:
When XenServer is already installed, a WWN can be checked using the following tools that are installed in
XenServer.
Emulex: OneCommand Manager Command Line Interface (XenServer 5.6 or later)
HBAnyware Command Line Interface (XenServer 5.5)
QLogic: SANsurfer FC HBA CLI (XenServer earlier than 6.5)
QConvergeConsole CLI (XenServer 5.6 or later)
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix
14
Copyright 2017 FUJITSU LIMITED
®
®
XenServer
P3AM-4572-19ENZ0