Fujitsu eternus af Panduan Konfigurasi - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu eternus af. Fujitsu eternus af 32 halaman. Fibre channel for citrix xenserver
Juga untuk Fujitsu eternus af: Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (43 halaman)
Halaman Cetak
Chapter 8
Setting Up XenServer
8.4
Creating a Storage Repository
2
Execute the following command in the console screen and check the recognition status of the LUNs.
cat /proc/scsi/scsi
Output example:
When connecting the ETERNUS DX80 S2 in a two-path configuration by creating two LUNs
Check that the number of recognized LUNs is correct.
The SCSI disks for the number of connected LUNs
for each path are recognized. (In this example,
four SCSI disks are recognized since there are
two LUNs in the two-path configuration.)
$ cat /proc/scsi/scsi
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: FUJITSU
Type:
Host: scsi5 Channel: 00 Id: 00 Lun: 01
Vendor: FUJITSU
Type:
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: FUJITSU
Type:
Host: scsi6 Channel: 00 Id: 00 Lun: 01
Vendor: FUJITSU
Type:
8.4
Creating a Storage Repository
To create a Storage Repository, refer to the relevant Citrix documents.
8.5
Setting the Multipaths
The XenServer multipath improves path redundancy.
Complete Storage Repository creation for all the LUNs to be used before starting the setup for multipath
configuration.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix
Model: ETERNUS_DXL
Direct-Access
Model: ETERNUS_DXL
Direct-Access
Model: ETERNUS_DXL
Direct-Access
Model: ETERNUS_DXL
Direct-Access
For a multipath configuration,
check that the same number of LUNs is
recognized for each path.
25
Copyright 2017 FUJITSU LIMITED
Check that the connected
ETERNUS DX/AF model
is correct.
Rev: 0000
ANSI SCSI revision: 05
Rev: 0000
ANSI SCSI revision: 05
Rev: 0000
ANSI SCSI revision: 05
Rev: 0000
ANSI SCSI revision: 05
®
®
XenServer
P3AM-4572-19ENZ0