Fujitsu eternus af Panduan Konfigurasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu eternus af. Fujitsu eternus af 43 halaman. Fibre channel for citrix xenserver
Juga untuk Fujitsu eternus af: Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman)

Halaman Cetak

Chapter 1

Workflow

Which documents need to be referred to varies with the connection environment. Refer to the workflow that

follows to determine which documents are required.

Required Documents

•

"Server Support Matrix"

"Server Support Matrix for FC-SWITCH"

•

"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS AF/DX

•

to be connected

"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"

•

"ETERNUS Web GUI User's Guide"

•

Manuals supplied with the server, Fibre Channel card, Fibre Channel card driver, and multipath driver

•

Workflow

Setting Up the ETERNUS AF/DX

Set the various parameters required to operate the ETERNUS AF/DX. Also, check the WWN of the Fibre

Channel card for the server that is required to set the ETERNUS AF/DX.

"Chapter 4 Checking the Server Information" (page 13)

•

"Chapter 5 Setting Up the ETERNUS AF/DX" (page 15)

•

Checking the setup and maintenance operations

"ETERNUS Web GUI User's Guide"

Setting up the ETERNUS AF/DX

•

"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-

NUS AF/DX to be connected

Setting Up the Fibre Channel Switches

If a Fibre Channel switch is to be used, set it up now.

•

"Chapter 6 Setting Up the Fibre Channel Switches" (page 16)

Checking the Fibre Channel switch connection requirements

•

"Server Support Matrix for FC-SWITCH"

FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX

P3AM-3772-22ENZ0