Brother HL-4200CN Panduan Pengaturan Cepat - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Server Cetak Brother HL-4200CN. Brother HL-4200CN 41 halaman. Brother hl-4200cn: quick setup
Juga untuk Brother HL-4200CN: Brosur (4 halaman)
Halaman Cetak
2
Install the Print Head Cartridge
1
Push up button
2
Push the button to open the paper outlet
cover.
3
Unpack the print head cartridge.
Tear off
Protective
Packing
4
Pull the 4 seals firmly to remove them
completely.
Check for a circle on the end of the seal.
If there is no circle on the end of the seal,
you can not use this print head cartridge.
Contact your dealer for assistance.
to open the front cover.
Front Cover
Paper Outlet Cover
Button
Print Head
Cartridge
Seals
5
Remove the protective packing.
6
Align the rollers of the print head cartridge
with the slots, and then gently lower it into
the printer.
Lowering the cartridge into the printer
without correctly aligning the rollers with
the slots can damage the cartridge.
Do not allow the surface covered with a
protective sheet to come to into the
contact with anything.
7
Pull the protective sheet on the cartridge
straight up to remove it.
Note: Do not touch the transfer roller.
Protective Sheet
8
Close the paper outlet cover.
Close the front cover.
Protective Packing
Transfer Roller
13