Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 44 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Chapter 1

Workflow

1.5

For Brocade Drivers

Setting Up the Fibre Channel Switches

If a Fibre Channel switch is to be used, set it up now.

"Chapter 6 Setting Up the Fibre Channel Switches" (page 34)

•

Setting up the Fibre Channel switches

•

"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre

Channel Switch Settings"

Checking the Fibre Channel switch connection requirements

•

"Server Support Matrix for FC-SWITCH"

Installing the Driver

Install the appropriate driver for the Fibre Channel card being used.

"Chapter 7 Installing Drivers and Setting Up the Server" (page 36)

•

Installing Fibre Channel cards and drivers

•

"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle

Solaris Driver Settings for Non-Fujitsu Fibre Channel Cards"

Checking the Fibre Channel card driver versions

•

"Server Support Matrix"

Setting Up the Server

Edit the setup file to set the parameters required for connection.

•

"Chapter 7 Installing Drivers and Setting Up the Server" (page 36)

Setting up the server

•

"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle

Solaris Driver Settings for Non-Fujitsu Fibre Channel Cards"

Setting Up the Server to Recognize the Logical Units

Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.

"Chapter 8 Setting Up the Server to Recognize the Logical Units" (page 37)

•

Have the server recognize the ETERNUS DX LUNs.

"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle

Solaris Driver Settings for Non-Fujitsu Fibre Channel Cards"

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3702-16ENZ0