Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 39

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 44 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Chapter 10

Setting a File System

10.1

The file system is created using exactly the same procedure as when creating a file system on a regular disk.

In each case, a confirmation message will be displayed after the command is executed. Enter "y" in response

to create the new file system.

When using single-path connection with the sd driver or hddv driver

•

Example command:

# newfs /dev/rdsk/c4t16d0s0

When using the ETERNUS Multipath Driver

•

Example command:

# newfs /dev/FJSVmplb/rdsk/mplb0s0

When using single-path connection with the Oracle Fibre Channel card or the Brocade Fibre Channel card

•

Example command:

# newfs /dev/rdsk/c2t2050000B5D6A0109d4s0

When using the MPxIO with the Oracle Fibre Channel card or the Brocade Fibre Channel card

•

Example command:

# newfs /dev/rdsk/c7t6000B5D0006A0000006A010900620000d0s0

•

When using VxVM

Example command:

# newfs /dev/vx/rdsk/dg0/v0

When using SVM

•

Example command:

# newfs /dev/md/rdsk/d0

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3702-16ENZ0