Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 28 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Chapter 7

Installing the iSCSI Software Initiator and Setting

Up the Server

7.1

Since iSCSI Software Initiator is provided with the OS, installation is not required.

7.2

iSCSI connection settings depend on the CHAP authentication method. Perform the settings to match the

CHAP authentication to be used.

CHAP authentication method

None

Unidirectional CHAP authentication

Bidirectional CHAP authentication

7.2.1

Set the number of commands allowed to be queued (command queue depth) on each LUN in the ETERNUS

DX/AF storage systems from the LAN card. This setting optimizes the connection between the ETERNUS DX/AF

storage systems and the server.

Edit the configuration file.

Edit the configuration file (/etc/system) and specify the command queue depth.

Model

ETERNUS DX/AF

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris

Required settings

"7.2.1 Setting Up the Command Queue Depth" (page 16)

"7.2.2 iSCSI Basic Settings" (page 18)

"7.2.1 Setting Up the Command Queue Depth" (page 16)

"7.2.2 iSCSI Basic Settings" (page 18)

"7.2.3 Server Settings when CHAP Authentication is Used" (page 19)

"7.2.1 Setting Up the Command Queue Depth" (page 16)

"7.2.2 iSCSI Basic Settings" (page 18)

"7.2.3 Server Settings when CHAP Authentication is Used" (page 19)

"7.2.4 Server Settings when Bidirectional CHAP Authentication is Used" (page 21)

Setting value

Command queue depth

Arbitrary (*1)

(Up to 1024 for each iSCSI port of the ETERNUS DX/AF)

P3AM-4042-18ENZ0