Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 43 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Halaman Cetak

Fujitsu ETERNUS DX Disk Panduan Konfigurasi

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS AF/DX to a server running HP-UX via a Fibre Channel interface.

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS AF/DX, server, OS, Fibre Channel cards, and drivers.

Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as

product trademarks and product names. For storage systems that are supported by the OS, refer to the Server

Support Matrix of the ETERNUS AF/DX.

The Contents and Structure of this Manual

This manual is composed of the following 12 chapters.

"Chapter 1 Workflow" (page 6)

•

This chapter describes how to connect the ETERNUS AF/DX to a server.

"Chapter 2 Checking the Server Environment" (page 8)

•

This chapter describes which servers can be connected to ETERNUS AF/DX storage systems.

"Chapter 3 Notes" (page 10)

•

This chapter describes issues that should be noted when connecting the ETERNUS AF/DX storage systems

and server.

"Chapter 4 Checking the Server Information" (page 13)

•

This chapter describes how to check the server's WWN settings.

"Chapter 5 Setting Up the ETERNUS AF/DX" (page 15)

•

This chapter describes how to set up the ETERNUS AF/DX storage systems using ETERNUS Web GUI.

"Chapter 6 Setting Up the Fibre Channel Switches" (page 16)

•

This chapter describes how to set up the Fibre Channel switches.

"Chapter 7 Installing Drivers and Setting Up the Server" (page 18)

•

This chapter describes the driver and server settings.

"Chapter 8 Checking Connections" (page 21)

•

This chapter describes how to check the connection status between the server and ETERNUS AF/DX.

•

"Chapter 9 Setting the Multipaths" (page 23)

This chapter describes the settings when operating with a multipath configuration.

"Chapter 10 SAN Boot" (page 27)

•

This chapter provides notes for SAN Boot.

"Chapter 11 Storage Migration" (page 28)

•

This chapter describes the procedures that are related to Storage Migration.

"Chapter 12 Non-disruptive Storage Migration" (page 37)

•

This chapter describes the procedures that are related to Non-disruptive Storage Migration.

FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX

Preface

22nd Edition

March 2020

P3AM-3772-22ENZ0