Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 24 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman)

Chapter 3

Notes

3.5

Notes on Creating and Mounting File Systems

3.5

Notes on Creating and Mounting File Systems

If the environment meets all the following conditions, the file system creation command may fail due to an

error.

RHEL7.3 or later, or SLES12 SP2 or later is used

•

ETERNUS DX S3 series is used with firmware version earlier than V10L70

•

A TPV or an FTV with an Allocation setting of "Thick" is used

•

Add the following options according to the file system type and execute the command.

If the file system is ext3/ext4

•

-E discard option

Example:

# mkfs.ext4 -E discard <Device name>

If the file system is xfs

•

-K option

Example:

# mkfs.xfs -K <Device name>

Do not specify the "discard" option when mounting these file systems.

3.6

Change /sys/block/sdX/queue/max_sectors_kb to a value of 7992 or less when tuning the maximum I/O size.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0