Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 24 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman)

Halaman Cetak
Fujitsu ETERNUS DX Disk Panduan Konfigurasi
Chapter 1
Workflow
1.2
When the Multipath Driver is Used
Setting Up the Server
Set the parameters required for connection to the ETERNUS DX.
"7.1 For Fujitsu SAS Cards" (page 17)
•
"7.2 For LSI Logic SAS Cards" (page 17)
•
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.
"Chapter 8 LUN Recognition" (page 18)
•
When the ETERNUS Multipath Driver is used
Setting Up and Checking the ETERNUS Multi-
path Driver
Set up and check the ETERNUS Multipath Driver.
"9.1 Setting Up and Checking the ETERNUS Mul-
•
tipath Driver" (page 21)
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux
Copyright 2018 FUJITSU LIMITED
When the device-mapper multipath is used
Setting Up and Checking the device-mapper
multipath
Set up and check the device-mapper multipath.
"9.2 Setting Up and Checking the device-mapper
•
multipath" (page 21)
"Configuration Guide -Server Connection- (Fibre
•
Channel/FCoE/iSCSI/SAS) for Linux device-map-
per multipath"
9
P3AM-3472-14ENZ0