Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Panduan Konfigurasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF. Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 29 halaman. Fibre channel/ eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems, eternus dx400 s2 series, eternus dx8700 s2 disk storage systems, eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection
Halaman Cetak
Contents and Structure
This document is composed of the following seven chapters:
●
Chapter 1 Workflow
This describes the workflow required to set up an ETERNUS DX/AF storage system for BS2000.
●
Chapter 2 Notes
This describes issues to be noted when connecting the ETERNUS DX/AF storage system and the BS2000
Server.
●
Chapter 3 Checking Prerequisites and Fibre Channel Card Information
This describes software requirements and how to get the Fibre Channel card WWNs of BS2000 Servers.
●
Chapter 4 Set Up the ETERNUS DX/AF Storage System for BS2000
This describes special settings required when connecting an ETERNUS DX/AF storage system to a server
with operating system BS2000.
●
Chapter 5 Set Up the BS2000 Server for ETERNUS DX/AF Storage Systems
This describes the configuration of ETERNUS DX/AF volumes on SE, S- and SQ-Servers with the
operating system BS2000.
●
Chapter 6 Check the LUNs
This describes how to verify installation and configuration by means of X2000 and BS2000.
●
Chapter 7 Example
Examples for the setup of ETERNUS DX/AF storage systems and BS2000 Server.
Acknowledgements
•
The company names, product names and service names mentioned in this document are registered
trademarks or trademarks of their respective companies.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
3
Copyright 2018 FUJITSU LIMITED
About this Manual
P3AM-5672-10ENZ0