Fujitsu ETERNUS DX100 S3 Konfigurasi Manual Koneksi Server - Halaman 7

Jelajahi secara online atau unduh pdf Konfigurasi Manual Koneksi Server untuk Penyimpanan Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 12 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu ETERNUS DX100 S3: Konfigurasi Manual Koneksi Server (12 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Setup Manual (15 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Fujitsu ETERNUS DX100 S3 Konfigurasi Manual Koneksi Server
Chapter 1
Workflow
Setting the CA Port Groups
Create a group of ports for each CA type.
"2.1.4 Setting the CA Port Groups" (page 9)
Setting the SAS Host
Register the SAS addresses of the accessing SAS cards.
"2.1.5 Registering the SAS Addresses of the Accessing SAS Cards (Setting SAS Host)" (page 9)
Setting the Host Affinity
Define the relationship between the SAS host, the CA port group, and the LUN group.
"2.1.6 Allocating LUN Groups (Setting the Host Affinity)" (page 10)
After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage
ETERNUS DX Configuration Guide -Server Connection- (SAS)" for each OS.
7
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-8542-04ENZ0