Fujitsu ETERNUS DX100 S3 Setup Manual - Halaman 8

Jelajahi secara online atau unduh pdf Setup Manual untuk Penyimpanan Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 15 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu ETERNUS DX100 S3: Konfigurasi Manual Koneksi Server (12 halaman), Konfigurasi Manual Koneksi Server (12 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Halaman Cetak
Fujitsu ETERNUS DX100 S3 Setup Manual

Power Cords

4
Connect the power cords to the inlets of the power supply unit.
Use release ties to hold the power cords in place.
Cable

Basic Setup

STEP
Use ETERNUS Web GUI to perform a basic setup of the ETERNUS DX.
Configuration Guide (Basic)
ETERNUS DX and PC Terminal Connection
1
Connect a PC terminal to the ETERNUS DX.
Connect the PC terminal to the RMT port of Controller 0 (CM#0) on the controller enclosure directly with the LAN
cable.
PC terminal
Powering On
2
Turn on the PC terminal and the ETERNUS DX.
Power switch
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide
Rear view
LAN port
LAN cable
RMT port of Controller 0 (CM #0)
Copyright 2017 FUJITSU LIMITED
Controller enclosure
Drive enclosure
Controller enclosure
8
Drive enclosure
Controller enclosure
P3AM-7852-06ENZ0