Fujitsu ETERNUS DX200 S3 Panduan Konfigurasi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX200 S3. Fujitsu ETERNUS DX200 S3 28 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu ETERNUS DX200 S3: Konfigurasi Manual Koneksi Server (12 halaman), Konfigurasi Manual Koneksi Server (12 halaman), Panduan Konfigurasi (13 halaman), Panduan Konfigurasi (18 halaman), Setup Manual (15 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Chapter 7

Checking Connections

7.2

Setting Up the Server to Recognize the Logical Units

Check that all connected devices are listed in the ioscan output and "CLAIMED" is displayed in "S/W

State".

The following example shows the output of ioscan (LegacyView) when ETERNUS DX storage systems are

connected to a server.

# ioscan

H/W Path

============================================================

255/0

255/0/0.0

255/0/0.0.0

255/0/0.0.0.0

255/0/0.0.0.1

255/0/0.0.0.2

255/0/0.0.0.3

255/0/0.0.0.4

When the ETERNUS DX storage systems are connected for the first time, the device file (for exam-

ple, /dev/dsk/c4t0d0) sometimes may not be created.

If this happens, use the "insf" command to create the device file. Specify the hardware path name as

follows, and execute.

# insf -H hw_path_to_device -e

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

Class

iscsi

ext_bus

target

disk

Description

iSCSI Virtual Node

iSCSI-SCSI Protocol Interface

FUJITSU ETERNUS_DXL

P3AM-3402-14ENZ0