Fujitsu ETERNUS DX200 S3 Panduan Konfigurasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX200 S3. Fujitsu ETERNUS DX200 S3 18 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu ETERNUS DX200 S3: Konfigurasi Manual Koneksi Server (12 halaman), Konfigurasi Manual Koneksi Server (12 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Setup Manual (15 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

FUJITSU Storage ETERNUS AF series and ETERNUS DX S4/S3 series

2.3.

Hardware Layout

Protection against power supply problems or other disasters at the installation site requires that hardware units be physically installed in

different sites.

Accordingly, install duplicate hardware units in different buildings, on different floors, or in different racks.

Whether management servers are also installed at different sites depends on whether redundancy is used.

The following figure shows a layout in which management server redundancy is not used.

Business servers

Fibre Channel switch

Business drives

(using Storage Cluster for clustering)

ETERNUS AF/DX

The business servers, Fibre Channel switches, and storage systems are installed in different buildings, on different floors, or in different racks.

By clustering the business servers and the storage systems between different sites, business continuity can be maintained in the event of a

problem that affects the entire site.

Install the management server at a different site to prevent it from being affected by the problems in the business servers and storage

systems.

Management server

Clustered

Figure-6 Layout in which management server redundancy is not used

Business drives

(using Storage Cluster for clustering)

ETERNUS AF/DX

Legend

Page 13 of 18

Business servers

Fibre Channel switch

Building/machine room/rack

SAN

LAN, used for operation and monitoring

http://www.fujitsu.com/eternus/