Fujitsu ETERNUS DX400 series Panduan Konfigurasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX400 series. Fujitsu ETERNUS DX400 series 17 halaman.
![Fujitsu ETERNUS DX400 series Panduan Konfigurasi](/uploads/products/server2/2444009/2444009.png)
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX410/DX440 or an ETERNUS DX8100/DX8400/DX8700 Disk storage system to a server running
Solaris OS, HP-UX, Windows®, Linux, VMware ESX, or Oracle VM Server via an iSCSI interface.
This manual should be used in conjunction with other applicable user manuals, such as those for the ETERNUS
DX410/DX440 or ETERNUS DX8100/DX8400/DX8700 Disk storage system, server, OS, iSCSI HBAs, LAN cards,
and drivers.
Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations
used in this manual such as product trademarks and product names.
This manual references the following document:
•
ETERNUSmgr User Guide
Also, note that in this manual the ETERNUS DX410/DX440, ETERNUS DX8100/DX8400/DX8700 Disk storage
systems are referred to as ETERNUS DX.
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
●
Chapter 1 Workflow
This describes the workflow when setting up an ETERNUS DX.
●
Chapter 2 ETERNUS DX Connection Settings
This describes the settings used when connecting an ETERNUS DX.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
3
Preface
Eighth Edition
December 2014
P3AM-3972-08ENZ0