Fujitsu Eternus DX440 S2 Panduan Pengguna - Halaman 22
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Fujitsu Eternus DX440 S2. Fujitsu Eternus DX440 S2 35 halaman. Disk storage system settings
Juga untuk Fujitsu Eternus DX440 S2: Panduan Pengguna (42 halaman), Instal Pengaturan (20 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (15 halaman)
Halaman Cetak
Chapter 6
Setting Up the Fibre Channel Switches
Perform the settings required to connect the ETERNUS DX Disk storage systems and server via the Fibre Chan-
nel switch, according to "ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel)
Fibre Channel Switch Settings".
If the access path is set with ETERNUS SF Storage Cruiser, the Host Response settings are set to the default
values.
If the Host Response settings are changed from the default values, set the Host Response again.
The following examples show configurations in which a server is connected to a Fibre Channel switch with
zoning.
The following example shows a configuration in which multiple servers are connected to multiple CAs.
ZONE1
Port0
Port1
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
Name : Server#1
Slot 0
Slot 1
ZONE2
Port2
Port4
Port6
FC switch
Port3
Port5
Port7
CA00
CA01
CM0
ETERNUS DX Disk storage system
Name : RAID#1
Copyright 2013 FUJITSU LIMITED
Name : Server#2
Slot 0
Slot 1
ZONE3
ZONE4
Port0
Port2
Port4
FC switch
Port1
Port3
Port5
Cascading
CA10
CA11
line
CM1
22
Port6
Port7
P3AM-3842-12ENZ0