Fujitsu Eternus DX500 S3 Panduan Konfigurasi - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu Eternus DX500 S3. Fujitsu Eternus DX500 S3 18 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu Eternus DX500 S3: Konfigurasi Manual Koneksi Server (12 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Tindakan Pencegahan Keselamatan (12 halaman)
Halaman Cetak
FUJITSU Storage ETERNUS AF series and ETERNUS DX S4/S3 series
2.4.
Workflow for System Configuration
This section describes the sequence of steps for setting up the example non-stop storage system configurations.
When the management servers are configured as VMs on vSphere, the steps to be performed are as shown below (from "Advance
preparation" to "Configuration of MA").
When the management servers are configured as a cluster using WSFC, the steps from "Configuration of Storage Cluster" onwards consist of
"Preparation of the WSFC environment" to "Customization of management server operations".
Operations for the ETERNUS DX200
Item
S4/ETERNUS SF and Fibre Channel switches
Perform an initial setup of
the ETERNUS DX200 S4
Perform an initial setup of
the Fiber Channel switches
Advance
preparation
Install ETERNUS SF Manager
Set up ETERNUS SF Manager
Implementation
of ETERNUS SF
Manager
Register devices to ETERNUS SF Manager
Register ETERNUS SF licenses
Preparation for
connecting
ETERNUS
Set up Fibre Channel switch zoning
Configuration of
AST
Implement ETERNUS SF Agent
Set up Storage Cluster controllers
Prepare business volumes
Configuration of
Storage Cluster
Confirm the synchronization startup
management servers
Copyright 2016-2017 FUJITSU LIMITED
Check WWNs and HBAs
Enable AST
Create tiering policies
Create tier pools
Create FTVs
Set up ports
Set up REC paths
Set up TFOG
Set up access paths
Configure
Operations for VMware
Implement ESXi hosts and vCenter Server
Configure
management servers
For a single
management server
Create management servers (VMs) (to the
OS environment)
For a single
management server
1
Page 15 of 18
Operations for clustering
management servers
For two management
servers to be clustered
using WSFC
Create management server #1 (to the OS
environment)
For two management
servers to be clustered
using WSFC
A
http://www.fujitsu.com/eternus/