Fujitsu Eternus DX80 S2 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Fujitsu Eternus DX80 S2. Fujitsu Eternus DX80 S2 35 halaman. Server connection. (fibre channel) for aix
Juga untuk Fujitsu Eternus DX80 S2: Panduan Pengguna (42 halaman), Manual (18 halaman), Instal Pengaturan (20 halaman), Konfigurasi Manual Koneksi Server (13 halaman), Instalasi Perangkat Keras (23 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (15 halaman), Panduan Konfigurasi (38 halaman)

Preface

The Contents and Structure of this Manual

This manual is composed of the following 11 chapters and an appendix.

"Chapter 1 Workflow " (page 11)

•

This chapter describes how to connect the ETERNUS DX Disk storage systems to a server running Linux.

•

"Chapter 2 Checking the Server Environment" (page 15)

This chapter describes which servers can be connected to ETERNUS DX Disk storage systems.

"Chapter 3 Notes " (page 17)

•

This chapter describes issues that should be noted when connecting the ETERNUS DX Disk storage systems

and server.

"Chapter 4 Installing and Setting Up ETERNUSmgr" (page 20)

•

This chapter describes how to install ETERNUSmgr.

"Chapter 5 Setting Up the ETERNUS DX Disk Storage System" (page 21)

•

This chapter describes how to use ETERNUSmgr to set up the ETERNUS DX Disk storage systems.

"Chapter 6 Setting Up the Fibre Channel Switches " (page 22)

•

This chapter describes how to set up the Fibre Channel switches.

•

"Chapter 7 Installing Drivers and Setting Up the Server" (page 24)

This chapter describes how to install the Fibre Channel card drivers and set up the server.

"Chapter 8 Connecting the Server to the ETERNUS DX Disk Storage Systems " (page 25)

•

This chapter describes how to connect the server and ETERNUS DX Disk storage systems.

"Chapter 9 Setting Up the Server to Recognize the Logical Units " (page 26)

•

This chapter describes how to make the server recognize the LUNs of the ETERNUS DX Disk storage system.

"Chapter 10 Setting Up and Checking the Multipath Driver" (page 29)

•

This chapter describes how to set up and check the ETERNUS Multipath Driver.

"Chapter 11 Setting a File System" (page 30)

•

This chapter describes how to create a file system.

The restoration procedure for when a path degrades in a VERITAS Volume Manager environment is described

in the appendix.

ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux

P3AM-3842-12ENZ0