Fujitsu ETERNUS DX8000 S2 Series Panduan Konfigurasi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX8000 S2 Series. Fujitsu ETERNUS DX8000 S2 Series 38 halaman. Server connection. (fibre channel) for aix
Halaman Cetak
Chapter 1
Workflow
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
"Chapter 7 Setting Up the Fibre Channel Switches" (page 19)
•
Checking the Fibre Channel switch connection requirements
•
"Server Support Matrix for FC-SWITCH"
-
Installing the Fibre Channel Card Drivers and Setting the Parameters
Install the Fibre Channel card drivers, and set up the server environment.
•
"8.1 Installing the Driver" (page 21)
"8.2 Setting Up the Driver Parameters" (page 21)
•
Checking the Fibre Channel card driver versions
•
-
"Server Support Matrix"
For the standard multipath driver or the ETERNUS
Installing the Multipath Driver
Install the ETERNUS Multipath Driver before using
it.
"8.3 Installing the Multipath Driver" (page 23)
•
Installing the Multipath Driver
•
Installation & Configuration Guide
-
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX/AF.
"9.2 Setting Up the Server to Recognize the Logical Units" (page 25)
•
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
Multipath Driver
8
Copyright 2018 FUJITSU LIMITED
For single-path connection or Veritas Volume
Manager
Installing the FJspio Package
Install the FJspio.
"8.4 Installing the FJspio Package" (page 23)
•
P3AM-3782-23ENZ0