Brother MFC 7345N - Laser Multifunction Center Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Cetak Brother MFC 7345N - Laser Multifunction Center. Brother MFC 7345N - Laser Multifunction Center 32 halaman. Quick setup guide - spanish
Juga untuk Brother MFC 7345N - Laser Multifunction Center: (Bahasa Inggris) Panduan Konfigurasi Cepat (32 halaman)
Halaman Cetak
STEP 1
Setting Up the Machine
3
Install the power cord and
phone line
1
Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
Connect one end of the telephone line cord to
the jack on the machine marked LINE and the
other end to a modular wall jack.
Note
Make sure the telephone line cord is connected to
the jack labeled LINE and not the EXT. jack.
6
Warning
• The machine must be grounded using a 3-prong
plug.
• Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
Note
If you are sharing one phone line with an external
telephone answering device, connect it as shown
below.
Please set the receive mode to
External TAD.
For more details, see Choosing the correct
Receive Mode on page 9 and Connecting an
external TAD in Chapter 7 of the User's
Guide.