Fujitsu ETERNUS DX8400 Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Fujitsu ETERNUS DX8400. Fujitsu ETERNUS DX8400 35 halaman. Server connection, (iscsi) for hp-ux
Juga untuk Fujitsu ETERNUS DX8400: Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman)
Halaman Cetak
Chapter 1
Workflow
Installing the Driver
Install the appropriate driver for the Fibre Channel card being used.
Applicable document varies according to the server, OS, and Fibre Channel Card type being used. Se-
lect from the following list.
"Chapter 7 Installing Drivers and Setting Up the Server" (page 24)
•
•
Installing Fibre Channel cards, installing drivers, and performing setup
"ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) for Linux
-
Driver Settings for Non-Fujitsu Fibre Channel Cards"
Checking the Fibre Channel card driver versions
•
-
"Server Support Matrix"
Installing the ETERNUS Multipath Driver
Install the ETERNUS Multipath Driver.
•
"Chapter 10 Setting Up and Checking the Multipath Driver" (page
29)
Installing and setting up the Multipath Driver
•
Manuals provided with the Multipath Driver
-
•
Checking the corresponding Multipath Driver
"Server Support Matrix"
-
Connecting the Server to the ETERNUS DX Disk Storage Systems
Connect the server and the ETERNUS DX Disk storage systems using the Fibre Channel cables.
"Chapter 8 Connecting the Server to the ETERNUS DX Disk Storage Systems " (page 25)
•
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
When the ETERNUS Multipath Driver is used
13
Copyright 2013 FUJITSU LIMITED
When VERITAS Volume Manager
or the device-mapper multipath
is used. Or, when the Multipath
Driver is not used.
P3AM-3842-12ENZ0