Fujitsu ETERNUS4000 600 Manual - Halaman 17

Jelajahi secara online atau unduh pdf Manual untuk Penyimpanan Fujitsu ETERNUS4000 600. Fujitsu ETERNUS4000 600 21 halaman. Disk storage systems (fibre channel) for oracle solaris
Juga untuk Fujitsu ETERNUS4000 600: Manual (28 halaman), Manual Koneksi Server (25 halaman), Manual Koneksi Server (32 halaman), Manual Koneksi (19 halaman)

Halaman Cetak

Chapter 3 Setting Up MPxIO

3.3 Solaris 8 OS

3.3.2

Checking the Storage System Status

Use the "format" command to check the path status before multipathing is set up (example out-

put follows).

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>

/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0113ce2e1,0

1. c2t2051000B5D6A0109d0 <FUJITSU-E8000-0000 cyl 6248 alt 2 hd 64 sec 256>

/pci@9,600000/SUNW,qlc@1,1/fp@0,0/ssd@w2051000b5d6a0109,0

2. c3t2050000B5D6A0109d0 <FUJITSU-E8000-0000 cyl 6248 alt 2 hd 64 sec 256>

/pci@9,600000/SUNW,qlc@2,1/fp@0,0/ssd@w2050000b5d6a0109,0

3.3.3

Editing the "/kernel/drv/scsi_vhci.conf" Settings

Edit the "/kernel/drv/scsi_vhci.conf" file.

Procedure

P3AM-2722-04ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

Enable MPxIO.

Check that an "mpxio-disable="no";" line exists, enabling MPxIO.

Otherwise, add this line or change its value to "no".

Enable the auto-failback function.

Check that an "auto-failback="enable";" line exists, enabling the auto-failback function.

Otherwise, add this line or change its value to "enable".

Enable the Symmetric option.

Add the following line.

For the ETERNUS2000

device-type-scsi-options-list =

"FUJITSU E2000", "symmetric-option";

symmetric-option = 0x1000000;

For the ETERNUS4000

device-type-scsi-options-list =

"FUJITSU E4000", "symmetric-option";

symmetric-option = 0x1000000;

For the ETERNUS8000

device-type-scsi-options-list =

"FUJITSU E8000", "symmetric-option";

symmetric-option = 0x1000000;

"d0" device is connected to c2 and c3 paths.