Fujitsu ETERNUS8000 800 Manual Koneksi - Halaman 13

Jelajahi secara online atau unduh pdf Manual Koneksi untuk Penyimpanan Fujitsu ETERNUS8000 800. Fujitsu ETERNUS8000 800 19 halaman. Disk storage systems (fibre channel) for oracle solaris
Juga untuk Fujitsu ETERNUS8000 800: Manual (28 halaman), Manual (21 halaman), Manual Koneksi Server (25 halaman), Manual Koneksi Server (32 halaman)

Halaman Cetak

Chapter 3 Setting Up the Server

3.2 Setting Up Brocade Fibre Channel Cards

The following procedure shows an example for setting the port speed, topology, and frame data

size.

Procedure

P3AM-4562-01ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

Check the "port_id" of the target port.

# bcu port --list

Port#

Type

PWWN/MAC

1/0

10:00:00:05:1e:e7:45:7b

1/1

10:00:00:05:1e:e7:45:7c

Check the port ID

The port ID checked here is used to set the port speed, topology, and frame data size.

Set the port speed to "8G".

# bcu port --speed 1/0 8

Setting will be enforced after port --disable and -enable

Set the topology to "p2p".

# bcu port --topology 1/0 p2p

Setting will be enforced after port --disable and --enable

Set the frame data size to "2048".

# bcu port --dfsize 1/0 2048

Setting will be enforced after port --disable and -enable

Execute the "port disable|enable" command to apply the port speed, topology,

and frame data size settings.

# bcu port --disable 1/0

port disabled

# bcu port --enable 1/0

port enabled

Check the port speed, topology, and frame data size that have been set.

•

Port speed confirmation

# bcu port --speed 1/0

Current port speed is:

Configured port speed is:

•

Topology confirmation

# bcu port --topology 1/0

Current topology is:

Configured topology is:

FC Addr/ Media

Eth dev

010400

010500

P2P

State

Spd

Linkup