Fujitsu ETERNUS8000 900 Manual Koneksi Server - Halaman 13

Jelajahi secara online atau unduh pdf Manual Koneksi Server untuk Penyimpanan Fujitsu ETERNUS8000 900. Fujitsu ETERNUS8000 900 25 halaman. Disk storage systems (fibre channel) for oracle solaris
Juga untuk Fujitsu ETERNUS8000 900: Manual (28 halaman), Manual (21 halaman), Manual Koneksi Server (32 halaman), Manual Koneksi (19 halaman)

Halaman Cetak

Fujitsu ETERNUS8000 900 Manual Koneksi Server

Chapter 5

5.1

Preparation

5.1.1

Installing the "open-iscsi" package

Red Hat Package Manager (RPM) is used to set up the iSCSI environment in the Linux server.

Check that one of the following RPMs is installed. If not, install it.

For SLES10 SP2: open-iscsi-2.0.707-0.44.<Architecture name> or later

Installation execution example

# rpm -ivh open-iscsi-2.0.707-0.19.<Architecture_name>.rpm

5.1.2

Preparing the device-mapper multipath setup

Use the following Red Hat Package Manager (RPM) to set up the device-mapper multipaths. If

this RPM is not installed, install it.

device-mapper-1.02.03-8.2.<Architecture_name> or later

device-mapper-32bit-1.02.03-8.2.<Architecture_name> or later

multipath-tools-0.4.6-25.17.<Architecture_name> or later

Installation execution example

# rpm -ivh device-mapper-1.02.03-8.2.<Architecture_name> or later

P3AM-4152-02ENZ0

ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux

(SUSE Linux Enterprise Server)

Setting Up the Linux Server