AEG PNC914550488 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG PNC914550488. AEG PNC914550488 44 halaman.

Halaman Cetak

www.aeg.com

WARNING!

Do not put cardboard, wood

or equivalent materials

below the appliance feet to

adjust the level.

The appliance must be level and stable.

A correct adjustment of the

appliance level prevents the

vibration, noise and the

movement of the appliance

when in operation.

When the machine is

installed on a plinth or if a

washer dryer is stacked on

the washing machine, use

the accessories described in

chapter 'Accessories'. Read

carefully the instructions

supplied with the appliance

and with the accessory.

3.3 The inlet hose

1. Connect the water inlet hose to the

back of the appliance.

2. Position it toward left or right

depending on the position of the

water tap.

20º

3. If necessary, loose the ring nut to set

it in the correct position.

4. Connect the water inlet hose to the

cold water tap with 3/4" thread.

3.4 Water-stop device

The inlet hose has a water stop device.

This device prevents water leaks in the

hose because of its natural ageing.

The red sector in the window «A» shows

this fault.

45º

Make sure that the inlet hose

is not in vertical position.

CAUTION!

Make sure that there are no

leaks from the couplings.

Do not use an extension

hose if the inlet hose is too

short. Contact the service

centre for the replacement

of the inlet hose.