Brother MFC-J265W Panduan Pengguna Tingkat Lanjut - Halaman 37
Jelajahi secara online atau unduh pdf Panduan Pengguna Tingkat Lanjut untuk Server Cetak Brother MFC-J265W. Brother MFC-J265W 50 halaman. Quick setup guide - spanish
Juga untuk Brother MFC-J265W: Instal Manual (35 halaman), Panduan Pengaturan Cepat (33 halaman), Panduan Pengguna (49 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (35 halaman)
Borderless printing
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Press a or b to choose Borderless.
Press OK.
b
Press a or b to choose Off (or On).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Date Print
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn't
have the date information, you cannot use
this function.
a
Press a or b to choose Date Print.
Press OK.
b
Press a or b to choose On (or Off).
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Printing photos from a memory card
Setting your changes as a
8
new default
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
8
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore the PhotoCapture settings
Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Cropping, Borderless, and
Date Print, that you have changed, to the
factory settings.
a
Press a or b to choose
Factory Reset.
Press OK.
b
Press 1 to choose Yes.
c
Press Stop/Exit.
8
8
8
31