Brother MFC-J265W Panduan Pengguna - Halaman 40

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Cetak Brother MFC-J265W. Brother MFC-J265W 49 halaman. Quick setup guide - spanish
Juga untuk Brother MFC-J265W: Instal Manual (35 halaman), Panduan Pengguna Tingkat Lanjut (50 halaman), Panduan Pengaturan Cepat (33 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (35 halaman)

Packing and shipping

the machine

When you transport the machine, use the

packing materials that came with your

machine. Follow the instructions below to

correctly pack your machine. Damage

caused to your machine during transit is not

covered by your warranty.

IMPORTANT

It is important to allow the machine to

"park" the print head after a print job.

Listen carefully to the machine before

unplugging it to make sure that all

mechanical noise has stopped. Not

allowing the machine to finish this parking

process may lead to print problems and

possible damage to the print head.

Open the ink cartridge cover.

Remove all four ink cartridges. Press

the ink release lever above each

cartridge to release it. (See Replacing

the ink cartridges in appendix A in the

Basic User's Guide.)

Install the green protective part and then

close the ink cartridge cover.

IMPORTANT

• Make sure that the plastic tabs on both

sides of the green protective part (1) have

securely clicked into place (2).

• If you are not able to find the green

protective part, DO NOT remove the ink

cartridges before shipping. It is essential

that the machine be shipped with either

the green protective part or the ink

cartridges in position. Shipping without

them will cause damage to your machine

and may void your warranty. When

travelling with the ink cartridges still in the

machine please keep the machine upright

as this will protect the machine from

leakage.