Brother MFC-J415W Panduan Pengaturan Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Server Cetak Brother MFC-J415W. Brother MFC-J415W 33 halaman. Quick setup guide - spanish
Juga untuk Brother MFC-J415W: Instal Manual (35 halaman), Spesifikasi Teknis (2 halaman), Panduan Pengguna Tingkat Lanjut (50 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (35 halaman)

Halaman Cetak
Brother MFC-J415W Panduan Pengaturan Cepat
11
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Station ID.
Press OK.
d
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a "+" for
international codes, press l.
e
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press Clear.
Press
One
key
time
2
A
3
D
4
G
5
J
6
M
7
P
8
T
9
W
f
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
For details, see Entering Text in Appendix C
in the Basic User's Guide.
Two
Three
Four
times
times
times
B
C
E
F
H
I
K
L
N
O
Q
R
U
V
X
Y
12
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Transmission
Verification Report in chapter 4 in the Basic User's
Guide.
13
Your machine comes set for Tone dialling service. If
you have Pulse dialling service (rotary), you need to
change the dialling mode.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Tone/Pulse.
Press OK.
d
Press a or b to choose Pulse (or Tone).
Press OK.
e
2
Press Stop/Exit.
3
4
5
6
S
8
Z
Fax Transmission Report
Set Tone or Pulse dialling
mode (Not available for
New Zealand)
9