Brother MFC-J4410DW Panduan Pengaturan Cepat - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Server Cetak Brother MFC-J4410DW. Brother MFC-J4410DW 45 halaman. Guía de wi-fi direct
Juga untuk Brother MFC-J4410DW: Panduan Pengaturan Cepat (47 halaman), Manual (36 halaman), Manual (22 halaman), Panduan Keamanan Produk (17 halaman), Manual (13 halaman), Manual (13 halaman), Manual (22 halaman), Panduan Keamanan Produk (20 halaman), Panduan Memulai Cepat (29 halaman), Panduan Keamanan Produk (25 halaman), Mulai dari Sini Manual (47 halaman), (Spanyol) Panduan Guia De Web Connect (38 halaman), Manual (Spanyol) (24 halaman), (Bahasa Inggris) Panduan Panduan Keamanan Produk (16 halaman), Manual (Spanyol) (12 halaman), Manual (Spanyol) (11 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (47 halaman), Panduan Fungsi (Bahasa Spanyol) (19 halaman)

Halaman Cetak
Brother MFC-J4410DW Panduan Pengaturan Cepat
For Wireless Network Users
e
Choose Yes, I have a USB cable to use for
installation. and then click Next.
f
Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
If the confirmation screen appears, check the
box and click Next, go to g.
Otherwise, go to h.
NOTE
• For instructions on connecting the USB cable
to the USB port of your machine, see Connect
the USB cable on page 13.
• If this screen appears, read the Important
Notice. Check the box after you confirm the
SSID and Network Key, and then click Next.
30
g
When the following screen appears, check Yes
if you want to connect to the listed SSID. Click
Next and go to j.
h
When the following screen appears, the wizard
will search for wireless networks available to
your machine. Choose the SSID that you wrote
down for your network in step 18-a on
page 27, and then click Next.
NOTE
• If a list of SSIDs is not displayed, make sure
your access point is on and set to broadcast the
SSID. Make sure the machine and the access
point are within communication range, then
click Refresh.
• If your access point is set to not broadcast the
SSID you can manually add it by clicking the
Advanced button. Follow the on-screen
instructions for entering the Name (SSID), and
then click Next.