Brother P-touch QL-1050N Panduan Pengguna - Halaman 42

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Cetak Brother P-touch QL-1050N. Brother P-touch QL-1050N 42 halaman. Quick setup guide (español) - english
Juga untuk Brother P-touch QL-1050N: Panduan Memulai Cepat (2 halaman), Panduan Pengguna Jaringan (41 halaman), Panduan Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (41 halaman), Panduan Pengguna (24 halaman)

Problem

• The printed barcode

cannot be read.

• I want to reset the printer/

delete the data

transferred from PC.

• I want to cancel the

current printing job.

• When printing via the USB

cable, the printer

repeatedly pauses and

then continues printing.

• Depending on the type of the

scanner, it cannot be read. Use

different scanner. We recommend

to print the barcode with print

setting as Give priority to quality.

Also, set the label vertical to the

print head as shown right.

• To reset the printer, turn OFF the printer. Press ON/OFF button and CUT

button six times. All the transferred data from PC will be deleted and reset the

machine to factory setting.

• Make sure that the printer is ON, and press ON/OFF button.

• Is the printer set for sequential printing?

If so, set print mode to buffered printing.

(Open printer properties from [Control

Panel]-[Printer and FAX] and click [Printing

Preferences...] button in the [General] tab.

Choose the option "After one page of data

is received".)

• An alternative solution is to disconnect the

LAN cable until USB printing is completed.

Solution

head

Label

Potential types of problems

Recom-

mended

direction