AEG AIK2853R Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas AEG AIK2853R. AEG AIK2853R 36 halaman.
Juga untuk AEG AIK2853R: Panduan Pengguna (44 halaman)

Halaman Cetak

www.aeg.com

• Remove the door to prevent children

and pets to be closed inside of the

appliance.

• The refrigerant circuit and the

insulation materials of this appliance

are ozone-friendly.

• The insulation foam contains

flammable gas. Contact your

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Location

Refer to the assembly

instructions for the

installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

3.2 Positioning

Install the appliance in a dry, well

ventilated indoors where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance.

Climate

class

Ambient temperature

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

municipal authority for information on

how to discard the appliance

correctly.

• Do not cause damage to the part of

the cooling unit that is near the heat

exchanger.

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only

be guaranteed within the

specified temperature

range. If you have any

doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

3.3 Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your

domestic power supply.

• The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a

qualified electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the

E.E.C. Directives.

3.4 Ventilation requirements

The airflow behind the appliance must

be sufficient.