Brother DCP-8155DN Panduan Pengguna Tingkat Lanjut - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Pengguna Tingkat Lanjut untuk Perangkat lunak Brother DCP-8155DN. Brother DCP-8155DN 39 halaman. Quick setup guide - english
Juga untuk Brother DCP-8155DN: Manual (36 halaman), Panduan Pengguna Tingkat Lanjut (50 halaman), Manual Jaringan (29 halaman), Manual (27 halaman), Panduan Pengaturan Cepat (23 halaman), Panduan Pengguna (23 halaman), Panduan Keamanan Produk (23 halaman)

Installing extra memory

Turn off the machine's power switch.

Disconnect the interface cable from the

machine, and then unplug the power

cord from the electrical socket.

Note

Be sure to turn off the machine's power

switch before you install or remove the

SO-DIMM.

Remove the plastic (1) and then

metal (2) SO-DIMM covers.

Unpack the SO-DIMM and hold it by its

edges.

Important

To prevent damage to the machine from

static electricity, DO NOT touch the

memory chips or the board surface.

Hold the SO-DIMM by the edges and

align the notches in the SO-DIMM with

the protrusions in the slot. Insert the

SO-DIMM diagonally (1), then tilt it

toward the interface board until it clicks

into place (2).

Put the metal (2) and then the plastic (1)

SO-DIMM covers back on.