Brother HL-730 Panduan Pengaturan Cepat - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Brother HL-730. Brother HL-730 17 halaman. Quick setup guide - english
Juga untuk Brother HL-730: Panduan Pengoperasian (25 halaman)

Halaman Cetak

English: HL-YL Quick Setup Guide, Body

Installing the Remote Printer Console

Before you install the program, make sure that you have the following hardware and

software:

DOS

Version 3.3 or later

Monitor

EGA/VGA or compatible

Option

Mouse; the mouse driver must be installed.

(You can also operate the program with the keyboard.)

Follow these steps to install the remote printer console program:

1. Make sure your printer is connected to your computer and is ready (On-line).

2. Start your computer. If you are in Windows, exit and return to the DOS prompt. You must

be in the DOS prompt to proceed with installation.

3. Insert the supplied disk into your floppy disk drive (A: or B:).

4. Select drive A or B to be used by typing

A: or B: after the DOS prompt and

pressing the Enter key.

5. Type RPCSETUP and press the Enter

key.

6. Follow the instructions on the screen.

Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX and press the Enter

key to start the Remote Printer Console

main program.

The Main Screen will appear on your

computer screen as shown on the right.

The RPC gets the current settings information from your printer when it starts if bi-

directional communication is enabled between your computer and printer. Otherwise, RPC

shows its default settings. If you want to change settings, move the cursor to the desired item

and select the desired setting by using the Enter and Cursor keys. Then, press the Enter key to

make the selected setting valid. If you use a mouse, click the desired item to change the

setting.

C:\>A:

A:\>RPCSETUP

Remote Printer Console

Direct_Access

Printer_Setup

Current Status

Status

Paper feed

Emulation

Paper Size

Orientation

Quality

Copies

Memory size

[ /

] Select

[Alt+Character] Menu

[F1] Help

Console_Config

Guide

Ready

Sheet Feeder

Auto

Letter

Portrait

Normal

524288 Byte

[Enter] Setting

[ESC] Exit