Brother HL-760 Series Panduan Pengaturan Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Brother HL-760 Series. Brother HL-760 Series 17 halaman. Quick setup guide - english
Juga untuk Brother HL-760 Series: Panduan Pengoperasian (25 halaman), Panduan Servis (44 halaman)

Halaman Cetak

English: HL-YL Quick Setup Guide, Body

Action 6-2: Prepare Windows 3.1 for the Printer

You need to configure Windows 3.1 for the printer by installing the printer driver and

TrueType-compatible fonts from the supplied disk into Windows 3.1.

Since the supplied printer driver and fonts are compressed on the disk, be sure to use the

supplied installer program to install them. These instructions assume you will install the

driver and fonts from the disk drive A.

1. Start Windows 3.1.

2. Insert the supplied disk for Windows into your floppy disk drive.

3. Choose Run from the File menu in the Program Manager.

4. Type the drive name where you inserted

the supplied disk and "SETUP" in the

box: for example, A:\SETUP. Click the

OK button or press the Enter key.

5. The installer program will begin. Follow the instructions on the computer screen.

(Be sure to restart Windows when the installation process is completed.)

NOTE

The installer automatically updates your SYSTEM.INI Windows file by adding

DEVICE=bi-di.386 under the [386Enh] section. If any bi-directional parallel

communications device driver has previously been installed, it will be deactivated by this

new driver. If you want to use the driver that was previously installed, you should re-install

your previous driver. However, re-installing the previous driver will make the HL-760

series driver inactive.

The installer makes the installed printer driver the Windows default.

The installer automatically sets the printer port to the parallel interface, LPT1.

If you select the status monitor ON, changes have been made to the SYSTEM.INI file. It is

necessary to restart Windows so that the changes become effective and the installed bi-

directional parallel communications device driver can take effect.