Wireless Setup Instructions for Windows
If you still have trouble with your network
connection, add UDP port 137.
Note: If the machine is configured for your
network, choose the machine from the list, then
click Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows APIPA in the IP Address
field, click Configure IP Address and enter an IP
address for your machine that is suitable for
your network.
If your wireless settings fail, an error
message will appear during the installation
of MFL-Pro Suite and the installation will be
terminated. If you encounter this failure, go
to step 16 on page 30 and setup the
wireless connection again.
If you are using WEP and the LCD displayed
'Connected' but your machine is not found,
make sure you entered the WEP key
correctly. The WEP key is case sensitive.
If the machine is not yet configured for use
on your network, the following screen
appears.
Click OK.
The Configure IP Address window will appear.
Enter an IP address for your machine that is
suitable for your network by following the on-
screen instructions.
9.
automatically start. The installation screens
appear one after another.
Important DO NOT cancel any of the screens
during the installation. It may take a few seconds
for all screens to appear.
Note: For Windows Vista®, when this screen
appears, click the check box and click Install to
complete the installation correctly.
10.
displayed, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, close your
web browser to return to this window, then click
Next.
4
© 1995 - 2010 Brother International Corporation
www.brother-usa.com
The installation of the Brother drivers will
When the On-Line Registration screen is
Halaman Cetak