AEG OKO-SANTO 1650-6 TK Panduan Petunjuk Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kulkas AEG OKO-SANTO 1650-6 TK. AEG OKO-SANTO 1650-6 TK 24 halaman. Larder fridge

Halaman Cetak

1. Starting up and Temperature Regulation

If your refrigerator is installed under

a continuous worktop, an air outlet

opening of at least 200 cm

ventilation grille (A/B) matching the

worktop design should be provided at

the rear of the worktop.

The cut surfaces of the worktop (C)

should be varnished to avoid swelling

due to penetration of moisture.

The appliance wall distance must be

at least 30 mm and should be

checked before the ventilation grille is inserted.

Special accessories:

A Ventilation grille, brown

B Ventilation grille, white

Detaching the worktop

After the worktop has been removed the appliance can be installed

underneath a continuous worktop.

The procedure is as follows:

Unscrew the Philips screws (F) on the

right and the left.

Lift the worktop slightly, push it

about 20 mm towards the rear, and

lift it off upwards (G).

Unscrew the holding bracket (H) and

keep it in a safe place.

Mounting under a continuous worktop

If installed under a continuous

worktop, the appliance is fastened

with a mounting screw (A) under the

panel.

and a

AEG36

AEG56

AEG96

A/B

105

570

550

200 cm

93-103