Brother MFC-5860CN Panduan Pengaturan Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Brother MFC-5860CN. Brother MFC-5860CN 34 halaman. Mfc-5460cn; mfc-5860cn
Juga untuk Brother MFC-5860CN: Setup Manual (23 halaman), Panduan Pengaturan Cepat (34 halaman), Panduan Servis (9 halaman)

Brother MFC-5860CN Panduan Pengaturan Cepat
4
Take out the ink cartridge.
5
Carefully remove the protective yellow cap (1).
1 1
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow cap comes off when you
open the bag, the cartridge will not be damaged.
Setting Up the Machine
6
Install each ink cartridge in the direction of the
arrow on the label.
Take care to match the colour of the lock
release lever (1) with the cartridge colour (2),
as shown in the diagram below.
7
Lift each lock release lever and gently push it
until it clicks, and then close the ink cartridge
cover.
Note
If the LCD shows Install Black,
Install Yellow, Install Cyan or
Install Magenta after you install the ink
cartridges, check that the ink cartridges are
installed correctly.
The machine will clean the ink tube system for
use for the first time. This process will occur
only once, the first time ink cartridges are
installed. The cleaning process will last
approximately four minutes.
2
1
M
brother
XXXX
9