Fujitsu fi-4530C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Printer Fujitsu fi-4530C. Fujitsu fi-4530C 14 halaman. Image scanner
Juga untuk Fujitsu fi-4530C: Memulai (27 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Brosur & Spesifikasi (2 halaman), Prosedur Instalasi (3 halaman), Panduan Petunjuk Pembersihan (13 halaman), Petunjuk Pembersihan (2 halaman), Buku Petunjuk (10 halaman), Prosedur Instalasi (5 halaman)

Halaman Cetak
Fujitsu fi-4530C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai
R
P
R
EPLACING THE
ICK
•
Remove all documents from
the ADF paper chute and
take it off of the scanner.
•
Open the ADF using the
ADF button.
•
Pinch the knobs on the sheet
guide and lift to remove it from
the scanner. Be careful not to
let the ADF close while your
fingers are in side.
•
Rotate the Pick Roller
Bushings on each end of the
Pick Roller Shaft in the
direction of the arrow so
each bushing is pointing up
don't break the plastic tabs
that hold each bushing in
place.
•
Lift the Pick Roller shaft up
being careful not to let the
ADF fall closed while your
fingers are inside the ADF.
The bushing is fixed to the
shaft on the end shown. On
the opposite end of the shaft
the bushing is loose and will
fall off. Use caution so you
don't loose this bushing.
fi-4530C & fi-5530C C
OLLER
ADF Paper Chute
Front of
Scanner
ADF Button
R
ONSUMABLE
EPLACEMENT AND
Pick Roller Bushing
(one on each end
of this shaft)
C
I
LEANING
NSTRUCTIONS
5