AEG OKO_SANTO SUPER Panduan Petunjuk Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kulkas AEG OKO_SANTO SUPER. AEG OKO_SANTO SUPER 22 halaman. Automatic refrigerator
Juga untuk AEG OKO_SANTO SUPER: Panduan Petunjuk Pengoperasian (21 halaman), Panduan Petunjuk Pengoperasian (32 halaman), Panduan Petunjuk Pengoperasian (32 halaman)

Mounting under a continuous worktop

If installed under a continuous work-

top, the appliance is fastened with a

mounting screw (A) under the panel.

The side at which the door opens can be changed from the right side

(factory adjustment) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the appli

ance may not be connected to the mains. Remove plug from the

mains beforehand.

Tilt the appliance slightly towards the

rear and drop it securely.

Unscrew the door hinge screws (K)

and take the door bearing (1) down-

wards out of its cavity.

Open the door a little way and take it

out downwards.

Unscrew the upper pin (A) and srew it

into place on the opposite side.

Fit the door into the upper pin (A)

and close it.

Insert the pin of the door bearing (1)

into the left hand cavity and screw

the bearing firmly into place with the

screws (K).

AEG96

AEG97

AEG98