Brother MFC-8460N Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Brother MFC-8460N. Brother MFC-8460N 8 halaman. Scan to ftp (file transfer protocol)
Juga untuk Brother MFC-8460N: Panduan Pengaturan Cepat (41 halaman), Setup Manual (23 halaman), Manual (7 halaman), Panduan Pengaturan Cepat (37 halaman)

Brother MFC-8460N Panduan Pengguna

2: How to configure

Before sending or receiving an Internet fax you must configure your Brother machine to communicate with
your network and mail server. You must ensure the following: a correctly configured IP address for your
machine, an E-mail address for your machine, the mail servers IP address, mailbox name and password
for your Brother machine. To do this, simply follow the following instructions.
1. Log onto the printer remotely through a web browser
2. Click on 'Network Configuration and enter your username and password if prompted. The default user
name is 'admin' and the default password is 'access'.
3. Click on 'Configure Protocol' and ensure that POP3/SMTP is enabled then click on 'Advanced Settings'
4. Here you will need to configure the Brother machine with information about your email server (Please
refer to next page for a detailed explanation of how to do this)
I-Fax
-2-
Copyright 2007 Brother International Europe
This is the location of
your SMTP server and
associated SMTP port
address. The standard
port number for SMTP
is 25
If your require SMTP
server requires
authentication, please
input the necessary
information here.
Some features of this
machine, like I-Fax, allow
you to send and receive
emails to it. Please
assign your printer an
email address to make
use of these features.
If you use POP 3, please
enter your POP3 details in
here. The standard port
number for this email system
is 110.
Click here if you use APOP
(more secure version of
POP3)