Fujitsu fi-5530C - Document Scanner Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Printer Fujitsu fi-5530C - Document Scanner. Fujitsu fi-5530C - Document Scanner 14 halaman. Color departmental scanner
Juga untuk Fujitsu fi-5530C - Document Scanner: Memulai (28 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Memulai (28 halaman), Brosur & Spesifikasi (2 halaman), Spesifikasi (2 halaman), Panduan Petunjuk Pembersihan (13 halaman), Buku Petunjuk (10 halaman)

Halaman Cetak
Fujitsu fi-5530C - Document Scanner Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai
fi-4530C & fi-5530C C
ONSUMABLE
6
R
C
EPLACEMENT AND
LEANING
R
P
R
EPLACING THE
ICK
•
Lift the Pick Roller Shaft out
of the scanner in the
direction of the arrow. The
bushing is fixed to the shaft
on the end shown. On the
opposite end of the shaft the
bushing is loose and will fall
off. Use caution so you
don't loose this bushing.
•
Remove the loose bushing
from the end of the Pick
Roller Shaft. Lift up slightly
on the Tab shown and slide
the Pick Roller off of the
shaft while the assembly is
out of the scanner.
•
Attach the new Pick Roller
by sliding it on to the shaft.
Rotate the Pick Roller to
align the screw on the shaft
with the slot on the Pick
Roller. Be sure the Pick
Roller tab clicks and the Pick
Roller is locked in place on
the shaft.
I
NSTRUCTIONS
(
.)
OLLER
CONT
Tab
Screw On
Shaft
Pick
Roller
Shaft
Slot on Pick
Roller