Brother MFC-8710DW Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Brother MFC-8710DW. Brother MFC-8710DW 23 halaman. Quick setup guide - english
Juga untuk Brother MFC-8710DW: Manual (30 halaman), Manual (36 halaman), Panduan Pengaturan Cepat (45 halaman), Panduan Pengaturan Cepat (45 halaman), Panduan Keamanan Produk (23 halaman)
Halaman Cetak
DO NOT inhale the toner powder. If toner powder is inhaled, please follow these steps
immediately:
• Move to an area with plenty of fresh air.
• Gargle and rinse your mouth out with plenty of water.
• If you develop a cough or any other symptoms soon after inhaling the toner, consult your
doctor immediately.
If toner powder is swallowed, rinse your mouth immediately and drink plenty of fresh water to
dilute the toner. Then consult your doctor immediately thereafter. For more safety information
regarding the toners used in your product, please visit the following web address to read the
Safety Data Sheets http://sds.brother.co.jp/sdsapp/index.html, which include important
information about the chemical composition of the toners and the precautions to take in case of
overexposure to toner.
HOT SURFACE
After you have just used the product, some internal parts of the product will be extremely hot.
Wait at least 10 minutes for the product to cool down before you touch the internal parts of the
product.
(MFC and DCP only)
When moving the product, grasp the side handholds firmly from the front of the product. The
side handholds are located under the scanner. DO NOT carry the product by holding it at the
bottom.
8